Company News

The problem of how to deal with the burr by laser cutting machine is puzzled. How does the burr come into being? What is the cause of the burr in the laser cutting machine? Let's give you a simple analysis.

Laser cutting technology is how to deal with the burr problem, some customers in the use of laser cutting machine processing of sheet metal workpiece, cutting out the effect is not ideal, but the burr is very much, the quality problem and many customers began to suspect that the laser cutting machine products, in fact. In the cutting process of metal laser cutting machine, because of improper operation and technical problems, the material in its processing will not produce burr. Burr is only produced in metal cutting, and there is no burr in non-metal cutting. How does the burr come into being? In fact, the burr is too much residue on the surface of a metal material. If a piece of material has burr, the material can be qualitatively inferior, the more the burr, the lower the quality. What is the cause of the burr in the laser cutting machine? The principle of the laser cutting machine, the technical analysis of the causes of its burr and solution.

I. There is a deviation in the upper and lower positions of the focus of the beam.

The solution: adjust the position of the focus, and adjust it according to the position of the offset.